The
KVAL ON-3 Door Feeder feeds doors
from stacks as high as 7 feet onto a
powered roll table. It accommodates
up to 3' x 8' doors weighing up to
200 lbs. The ON-3 is designed to
lift flush or panel doors off of
stacks and place them on the in-feed
side of door sizing or routing
machines. Doors are lifted and held
by air pressure clamps and cylinders
from both edges of the door, then
moved automatically on an overhead
track system to the in-feed portion
of the feeder. Door is then lowered
onto powered feed rolls, which move
it to the adjacent machine. Cycle
time is 20 seconds.
